How to Improve Radio Reception?

best jobsite radiosYour radio doesn’t sound as good as it used to. Right?

Indeed, you hear a lot the advertisements of high-performance radios. But do you believe that any small radio, even poor performance radios can benefit from just following some simple tricks?

Do you know that each station has a different antenna height as well as power output? In fact, a station has a diverse coverage range.

You should keep in mind that radio broadcasting is nothing but a “system”. Signal reception from your local stations in your city is quite easy. For this, you don’t need any special effort or thought. Just turn on your radio and there it is. However, if you try for a more distant station, it’ll sometimes need some extra effort.

But Relax!

There are probably some beneficial ways for receiving end to improve the reception of your best jobsite radios/ FM/ AM/ Home stereo.

So, let’s see how we can improve our radio reception.

How To Improve Radio Reception of The Best jobsite radios, FM/AM/ Home Stereos- Tips and Tricks

Following are some suggestions for improving reception of the best jobsite radios, FM/AM/ Home stereo.

  • Location Is A Matter!

Brick, steel and concrete may interfere your radio signal.

Sounds unbelievable?

Naturally, your radio reception will suffer if you place your radios in the center of a room made from these elements.

It’s better to keep your radio near a window if you are listening to your radio while working in a confined room. If you know the direction of your local station, place your radio near the window facing that direction.

When more powerful local stations on adjacent frequencies are near, a good-quality radio works fine. But what about the more distant stations?

Remember!

A radio that has excellent sound and fidelity won’t always feature good receiver. If that happens to your radio, we’d suggest you go for a radio that is easy to use, has excellent performance on both FM and AM and has external antenna connections.

  • Work On The Antenna

For better radio performance as well as good signal reception, the antenna is vital. In fact, the antenna is a matter that needs attention for the better signal reception.

Whether it’s a home stereo or jobsite radios, it has a built-in antenna wire or rod or some opportunities for an extra antenna hookup. Although wire or rod isn’t the prettiest thing, stretching them or moving them around often provides significant signal reception improvement.

Naturally, FM radio can accept signals in a wave about 6-feet wide. But you’ll get the better results by extending the antenna wire or rod out fully. If the antenna wire or rod extends at least 3- feet, it’s all the better!

If your radio features an external antenna connection on the back, a simple antenna made of wire will be helpful.

Hope you know, FM radio signals travel horizontally. So, avoid placing the antenna vertically. You can position the antenna wire or rod diagonally or horizontally to get better results.

FM Antennas

The antennas have a significant effect on FM broadcasting. But the built-in radio antennas aren’t often adequate. You can improve the reception by merely adding an external antenna to your FM radio.

AM Antennas

Although the built-in antenna for AM does a good job, adding a simple loop or wire can help you a lot to improve the reception. It’s wise to rotate the AM radio to find the best signal.

  • Switch Between MONO FM and Stereo FM

Are you suffering from hiss and static from your radio?

Most stereo FM radios feature the ability to switch between Stereo FM and MONO FM. It doesn’t matter how small or how big your home stereo, walk man, mini-stereo, jobsite radios or even car stereos if you switch to MONO, you’ll get a much robust and cleaner signal.

Sounds Great! Isn’t It?

Some people think that car stereos are better due to its “auto-MONO” feature that automatically switches to MONO when it gets the weaker signal. But the reality is that car stereos are just “smarter”.

If your radio features “stereo” versus “MONO” switch, trying to both positions may help you to get a good signal. However, if you get weak reception, switching to “MONO” mode may help you to get the best signal.

Some More Tips

  • If you suffer noise interference, locate your radio or antenna away from the sources of interference.
  • If you suffer interference from a station on the next dial position, choose a good quality radio with better “selectivity.”
  • FM receptions may suffer sound noise or distortion due to the combination of signals from the transmitter site with other signals. In this case, move your radio or antenna around your jobsite to find the best reception.
  • If no antenna is available, you can make your wire antenna that will also work very well.

Conclusion

To receive and enjoy your favorite programs to the fullest, you’ll need a good radio and an excellent location. But a good antenna will also be very helpful to improve the signal of reception.

The good selectivity and good sensitivity of a radio is a must-have feature for gaining good reception.

In our article, we’ve tried our best to bring you information and simple tips to improve your FM/ AM/ home stereo radio reception.

Hope, it’ll help you much to get the best possible reception to your best jobsite radios as well.

Leave a Comment